100mm Cavity Timber Frame Ties

The TecTies Stainless Steel Timber Frame Wall Ties can fix brickwork or blockwork to the timber frame up to a maximum of 4 storeys and 15m in height.

Fully tested to BS EN 846-6:2012. The ties meet the requirements of BS EN 845-1:2013 as a Type 6 tie and meets the technical requirements of NHBC. It is recommended that TecTies Timber Frame Ties are installed at a density of 4.4 ties per square metre in buildings where the basic wind speed does not exceed 25m/s. This density should be increased to 7.0 ties per square metre in more severe situations.

TecTies Timber Frame Ties are supplied with stainless steel annular ring shank nails and manufactured in five sizes to suit 50mm, 75mm, 100mm, 125mm and 150mm cavity widths.

Compressive Load Capacity 580N
Tensile Load Capacity 1349N
Displacement at 1/3 Load Compression 0.37mm
Displacement at 1/3 Load Tension 0.21mm