Mechanical Remedial Wall Ties 200mm

Use in small commercial buildings up to three storeys, (not greater than fifteen metres in height) or domestic dwellings comprising of brick or blockwork of similar thickness.
Suitable where the walls are sound. These Neoprene Wall Ties ties are simple to install and inner leaf connection can be checked before the outer leaf is tightened.
Unsuitable for timber frame buildings.

Stainless Steel

NEOPRENE EXPANSIONS
The inner neoprene spreader has oversized ridges to create an immediate grip on the wall of the hole removing the reliance on the knurled nut to hold whilst the inner section of the tie is expanded.
To reduce damage to the brickwork and to allow for movement between the two leaves without reducing any performance in tension. A drip ring is fitted.

DRILL DIAMETER
10-11mm into normal brick and blockwork.
10-11mm into outer leaf only if Stock or Accrington brick.
Minimum depth of drill hole into the inner leaf – 70mm.

PULL OUT STRENGTHS IN KN
Stock or Accrington brick 2.9Kn
Common Brickwork 2.7Kn
Blockwork 2.1Kn
Soft Blockwork 1.9Kn
40N Concrete 3.0Kn
30N Concrete 2.7Kn

INSTALLATION TECHNIQUE
Expand the tie into both the inner and outer leaf to the recommended torque.

APPLICATIONS
Suitable where the walls are sound. Are simple to install and inner leaf connection can be checked before the outer leaf is tightened. Unsuitable for timber frame buildings.

FIELD OF USE
Domestic dwellings, small commercial buildings up to three storeys, (not greater than fifteen metres in height) comprising of brick or blockwork of similar thickness.

11mm
A2 stainless steel
Grade 304
Torque nut for guaranteed setting
Neoprene expansion for ease of grip and non-aggressive in brickwork
Long life over 30 years