Face Fix Joist Hanger 440 x 100mm

Expamet BAT "Maxi" Face fix Joist Hanger

Installation requirements
- Fix using all holes to achieve stated loads (nails or bolts)
- Ensure hanger is the correct size for joist. Any slack to be packed.
- Joists are to be cut square with a gap not exceeding 6mm from the rear of the hanger.
- Ensure sides of hanger are at least 60% of joist height to prevent rotation
- Ensure floor has suitable noggins/strutting as required before applying load.

Features/Benefits
- Face fixing allows attachment to any substrate
- 275g/m2 Gavanized Coating
- Can be fixed using nails or bolts
- Covered by a European Technical Approval

Fixing Hole Dimensions
4.5mm (Nails) 14mm (Bolts)

Fixing Type
3.75 x 30mm Square Twisted Sherardized/Galvanised Nails or M12 Bolts/Coachscrews

External Height of Hanger 170mm
Internal Width of Hanger 100mm
Projection 75mm Shoe
Material Gauge 1.5mm
Coating 275g/m² Zinc Coating
Material Galvanized Mild Steel DX51D+Z275 to EN10346:2015
European Standard/ETA ETAG015 (ETA13/0803)
Test Standard ETAG015/TR016
Fire Rating Euroclass A1

Notified Body
Exova BM Trada (NB 1224)

Maxi Speedy - Characteristic Load Capacity Fk (kN) - C24 Timber
(mm)
Width 38 38 47 47 50 50 63 63 75 75 100 100 122 122 150 150
Fix Type Nails Bolts Nails Bolts Nails Bolts Nails Bolts Nails Bolts Nails Bolts Nails Bolts Nails Bolts
MS240 2.39 4.50 2.66 5.57 2.77 5.92 3.36 7.46 4.19 8.88 6.67 11.84
MS335 4.87 5.98 5.44 7.05 5.66 7.40 6.86 8.94 8.55 10.36 11.68 14.74
MS380 6.26 7.46 7.03 8.53 7.32 8.88 8.96 10.42 11.30 11.84 13.34 17.60
MS440 8.89 10.35 9.96 11.42 10.37 11.77 12.65 13.31 15.89 14.74 20.31 20.10
MS500 13.15 13.27 14.73 14.34 15.35 14.69 18.73 17.06 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31
MS560 18.59 16.75 20.31 18.79 20.31 19.59 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31
MS620 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31