550 x 1200mm Keylite Loft Ladder & Frame 2800mm High 3 Segments KYL02 Fire Rated

A Loft Ladder with a 30 minute Fire Rating is ideal
for meeting specific Building Regulations.

Features

Fire Resistance – The Keylite Fire Resistant Loft Ladder has obtained a 30
minute Fire Rating classification in compliance with EN 1634-1 and EN 13501
Installation – Unlike the standard Keylite Loft Ladder we are unable to provide
our Unique Patented Flick-Fit Brackets, as a result the Fire Resistant Loft Ladder
is required to be installed like a conventional loft ladder from inside
the roof and will require a two person installation.
Continuous Seal – Keylite Loft Ladders have incorporated a continuous seal
around the trap door which reduces Heat Loss and improves the overall Air
Tightness of the product.
Intumescent Strip – All Keylite Fire Resistant Loft Ladders also feature an
intumescent strip which will expand when subject to increased temperatures in
the event of a fire.
Insulated Trapdoor – The 42mm thick Insulated Trapdoor is supplied as
standard on all Fire Resistant Keylite Loft Ladders and boasts an impressive
U-Value of 1.1 W/m²K.
Pre-Fitted Handrail - Located to the right hand side of the ladder, the handrail
offers added safety when using the ladder.
Controlled Dismount – The incredibly durable hinges used between the
segments of the Fire Resistant Loft Ladder offer increased safety and peace of
mind when opening the trapdoor that the ladder will not drop independently on
the person below.
Slip Resistant Treads - The profile of the rungs on a Keylite Loft Ladder include
a series of built in slip resistant treads to offer increased safety and
assurance to the user when accessing and egressing the ladder.
Dovetail Joints - All of the rungs on a Keylite Loft Ladder feature Dovetail joints
at the intersect with the Ladder rails for increased tensile strength and allow the
maximum weight capacity of the ladder to reach, but not exceed 150Kg.
Protective Feet – Every one of the Keylite Loft Ladders are provided with a
pair of protective feet for the ends of the rails. These protective feet act to
combat the scratches to laminate floors and tiles that can occur when the feet
are not applied and the exposed timber continually rubs along the surface
of the floor.
Air Tightness – All of the Keylite loft ladders are draught proof and have
obtained the highest classification possible on these products, Class 4.
Approved – Keylite have invested in their products in order to gain the relevant
certification and accreditations from national and European bodies. The Keylite
Loft Ladder is no different and is fully certified to EN 1634-1 and EN 13501.

Application

Keylite recommend installing the Loft
Ladder so that the frame bottom is
placed flush with the underside of the
finished ceiling.
When the ladder is fully extended you must
ensure that the distance from the frame
bottom to the finished floor bottom does
not exceed 2.7m on a KYL 01-02, KYL 04-
05 and KYL 07-08 and 3.1m on a KYL 03,
KYL 06 and KYL 09.
Similarly the rear of the ladder must be
installed a minimum of 1.65m from any
vertical surfaces such as walls and doors.
Finally Keylite recommend that the Loft
Ladders are not installed close to
a stairwell