Flame Retardant Sheeting Orange 2/4x25mx250mu

bpi FR+ Flame Retardant Temporary Sheeting

Usage
The bpi FR+ LPS1207 Flame Retardant Temporary Protective Sheeting can be used for screening off individual areas, draping and for a variety of surfaces. Suitable for wrapping large pieces of asbestos or asbestos tent applications. The product can be easily cut and re-sized for pallet hood / cover protection.It can be also used in various other applications whilst buildings undergo refurbishment work or in new build construction projects whilst also providing protection from dust and the risks of electrical hazards.
bpi FR+ ensures compliance when insurers, developers and owners have a clause in the main contractors policy requesting compliance with "LPS1207" and ‘The Joint Code of Practice’. Using flame retardant materials helps reduce the risk of losses from
fires on construction sites.
Fast track build programmes and delay penalties now see internal finishes installed at an earlier stage within the build programme. This means finishes are exposed to following trades leaving the potential for damage. Any repair or cleaning can prove costly and time consuming and can result in a delay in hand over of the premises. The product allows for finishes to be installed, then protected, meaning the site can progress as planned.

Product description
bpi FR+ Flame Retardant Temporary Protective Sheeting is manufactured using virgin polymers with specialty additives to ensure the product is flame retardant to LPS1207.

System components
VisqueenPro Single Sided Tape, 75mm x 25m

Storage and handling
Store in a warm, dry and clean environment in its current packaging. Visqueen FR+ should be stored horizontally, under cover in its original packaging.
Care should be taken when handling the product in line with current manual handling regulations

Preparation
Surfaces must be smooth and free from sharp protrusions.

Installation
Material should be laid print (LPS logo) uppermost. Unroll the material and cut to fit the area to which is going to be protected. When jointing allow an overlap gap of at least 75mm to provide a trip or dust free joint and tape securely with a single sided tape.
Smooth down all taped joints and perimeters by applying pressure along their length.

Usable temperature range
It is recommended that the FR+ is used above 5 degrees Celsius

Additional information
Using Flame Retardant Products will significantly diminish fire loading. Furthermore, the use of LPS 1207 approved products, such
as Visqueen Megafilm® is an assurance that ample and reasonable steps have been taken to reduce the risk of fire. All products
have the relevant accreditation body approval mark and manufacturers certificate number.

Features and benefits
LPS1207 cert.no 521a/03 - 3rd party flame retardant certification
Large roll format - Ideal for draping, screening, covering or hanging. Quick and easy installation.
Flame retardant - helps reduce the risk of losses from fires on construction sites
LPS1207 temporary protection - helps avoid delay penalties to fast-track build programmes when areas are exposed to damage
LPS1207 cert.no 521a/03 - Complies with the Joint Code of Practice Insurance requirements
0.25mm (1000 gauge) thick - Approved for asbestos removal or wrapping film
LDPE - Reusable and recyclable
Multi-use - can be cut and fitted for pallet hood cover protection
Manufactured in the UK by Visqueen

Approvals and standards
LPCB: LPS1207 Loss Prevention Standard certificate no. 521a/03
Ignitability (Small & Large tests) (BS 476: Part 12:1991 & LPS: BS5852)
Smoke Emissions Test (prEN 2825 & prEN 2824)
Toxic Gas Emission Test (prEN 2826 & prEN 2824)
Critical Oxygen Index (BS 2782: Part 1: Method 141: 1986)
Quality Management System ISO 9001:2015