Visqueen Vapour Tape 75mm x 15m
VisqueenPro Single Sided Vapour Tape, 75mm x 15m
Usage
VisqueenPro Single Sided Vapour Tape is used for sealing joints of Visqueen Vapour Barrier and Visqueen High
Performance Vapour Barrier.
Storage and handling
Store in a dry and clean environment in its original packaging. The tape should not be exposed to long periods of
ultraviolet light.
Care should be taken when handling the product in line with current manual handling regulations.
Preparation
The lap area of Visqueen Vapour Barrier or Visqueen High Performance Vapour Barrier should be clean, dry and
free from contamination such as dust.
The tape can be cut with a sharp retractable safety knife or robust scissors.
Installation
All joints in the Visqueen Vapour Barrier or Visqueen High Performance Vapour Barrier should be lapped by a
minimum of 75mm and sealed with VisqueenPro Single Sided Vapour Tape.
When using the tape, apply equidistant over the barrier lap area. Apply pressure to the jointed area to ensure
adhesion. Once the tape is applied, the completed lap should be well rollered with firm pressure to ensure a
completely sealed joint has been formed and continuity with the adjacent sheet has been achieved.
To aid formation laps should be made over a solid substrate.
Usable temperature range
It is recommended that VisqueenPro Single Sided Vapour Tape should be installed above 5°C.
Additional information
Care should be taken to prevent the AVCL from becoming punctured, stretched or displaced when installing
plasterboard or other construction board over the installed AVCL.
For additional detailing information, contact Visqueen Technical Services +44 (0) 333 202 6800.
The information in this datasheet was correct at the time of publication. It is the user’s responsibility to obtain the
latest version of the datasheet as it is updated on a regular basis. The information contained in the latest
datasheet supersedes all previously published editions.
Health and safety information
Refer to the VisqueenPro Single Sided Vapour Tape safety datasheet (SDS).
